![]() Once that is done, it will create firewall and NAT rules based on the info you provided. What is 'port forwarding' How do I create a NAT policy and access rule A short video that provides step-by-step instructions using the latest in network se. I have a static IP address on my modem and the DVR, and confirmed both ports are open on the LAN. Next I need to forward TCP/UDP ports to the WAN for a camera system DVR. Source: Been supporting sonicwalls for over 10 years. The sonicwall has a wizard, click the wizard button at the top right of the page and answer the questions, it will ask for ports/service, IP address, etc. The box is up and running great with internet working. Traffic coming from the external IP, using the service object/group, will be allowed to go to the private IP. The rule is basically the same as in NAT. Lastly, go into your Firewall settings and create a new rule for traffic coming from WAN to LAN. Make another rule with the reverse (Traffic out of the private IP, using the service group, translates as the public IP). The SonicWALL Installation Wizard helps quickly install and configure the SonicWALL. Then, go to NAT Rules and create a new rule that will take any traffic coming from your public IP address object, using the service object/group you created, and translate it as the private IP address object. If the SonicWALL includes a DMZ port, users on the LAN and on the. In the Link Speed pulldown menu, select the link speed for the interfaces. In the PortShield Interface pulldown menu, select which interface you want to assign as the master interface for these PortShield interfaces. The 2nd object will be the external IP address you want the outside world to use to access your server. In the Port Enabled pulldown menu, select whether you want to enable or disable the interfaces. The first object will be the private server IP that probably lives in the LAN zone (if you haven't configured different zones). If using more than one port range, create an service group and add all the service objects your server will use.Ĭreate two address objects. ![]() Create another one if you also need UDP ports. Create an service object that includes the TCP ports you want to forward.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |